wiki:process_slicer-tips-and-tricks_setting-speed-multiplier-per-layer
Adjusting Print Speed at a Layer Height
Some people find that setting the printer speed multiplier to 80%-100% during bridging, top/bottom layers, and then setting it to 150%+ during everything else, has lead to faster prints. YMMV. Below is how you set the speed multiplier (or any custom gcode) at a specific layer height.
1. 
2. 
3. 
4. 
5. 
6. 
wiki/process_slicer-tips-and-tricks_setting-speed-multiplier-per-layer.txt · Last modified: by bb3d