Differences

This shows you the differences between two versions of the page.

--- wiki:process_plate-rotation [2026/01/22 21:19] – Added note about when to heat the GECO plate 46d397
+++ wiki:process_plate-rotation [2026/01/23 06:25] (current) – [Recommended Third-Party Build Plates] bb3d
@@ Line 26: / Line 26: @@
 ==== Recommended Third-Party Build Plates ====
 //Please add your recommendations here!//
-  * Juupine GECO (Amazon: [[https://a.co/d/0dEhoTD|X1/P1/A1]], [[https://a.co/d/5ZUN5WG|H2D/H2S]], others sizes in links): PLA only, but **does not require bed heat** for good adhesion. Useful to reduce energy usage or make your printers not be space heaters (If ambient temperature is <= 20C, heat to at least 20C). Has a finer texture (similar to "satin" plates) than gold TexPEI. Very important to let cool before removing prints - can remove surface if not careful
+  * Juupine GECO (Amazon: [[https://a.co/d/0dEhoTD|X1/P1/A1]], [[https://a.co/d/5ZUN5WG|H2D/H2S]], others sizes in links): PLA only, but **does not require bed heat** for good adhesion. Useful to reduce energy usage or make your printers not be space heaters (If ambient temperature is <= 20C, heat to at least 20C). Has a finer texture (similar to "satin" plates) than gold TexPEI. Very important to let cool before removing prints - can remove surface if not careful. Do not use brims on this plate.
   * Fysetc Cryonix (Amazon: [[https://www.amazon.com/FYSETC-Printer-Accessories-H2D-Double-Sided/dp/B0F8V187TK|H2D/H2S]], [[https://www.amazon.com/FYSETC-Printer-Accessories-256mm-Build/dp/B0FJ2D4GCQ|X1/A1/P1]]) Has a finer texture (similar to "satin" plates), better PLA adhesion, and less PETG overadhesion than gold TexPEI plates. Can drop PLA bed temps ~10C and retain adhesion
-  * Biqu Cryogrip Glacier (Amazon [[https://a.co/d/1IYdjyo|X1/P1/A1]], [[https://a.co/d/7SplFs8|H2D/H2S]], other sizes available in links): Similar to the Cryonix - finer texture, better PLA Adhesion, less PETG overadhesion than TexPEI plates. Can drop PLA bed temps ~10C and retain adhesion.
+  * Biqu Cryogrip Glacier (Amazon [[https://a.co/d/1IYdjyo|X1/P1/A1]], [[https://a.co/d/7SplFs8|H2D/H2S]], other sizes available in links): Similar to the Cryonix - finer texture, better PLA Adhesion, less PETG overadhesion than TexPEI plates. Can drop PLA bed temps ~10C and retain adhesion. PLA Silks can over-adhere to this plate.
+  * [[https://www.fabreeko.com/products/honeybadger-v2-4-single-sided-black-pei-textured?_pos=4&_sid=dc0bc4e16&_ss=r | Fabreeko Textured Plates]]
+  * [[https://kb-3d.com/store/hardware/803-kb3d-flex-build-plate-dual-sided-textured-pei-black-05mm.html|KB3D Textured Plates]]