wiki:printers_prusa
Prusa Printers
Pre-Plated 3MFs
MK3(S+)
-
- This is a 3MF of 9 plates of individual whistle types. Bed 1 is a test plate.
- This uses mostly-stock presets and the plates themselves are not space-optimized.
- Models Used:
-
- This is a 3MF set to print each whistle individually. You don't get nearly as many on a plate this way, but its a helpful tool if you need to run out a roll of filament and don't want to play “filament chicken”.
- This uses mostly-stock presets and the plates themselves are not space-optimized.
- Models Used:
MK4(S)
-
- This is a 3MF of 9 plates of individual whistle types. Bed 1 is a test plate.
- This uses mostly-stock presets and the plates themselves are not space-optimized.
- Models Used:
-
- This is a 3MF set to print each whistle individually. You don't get nearly as many on a plate this way, but its a helpful tool if you need to run out a roll of filament and don't want to play “filament chicken”.
- This uses mostly-stock presets and the plates themselves are not space-optimized.
- Models Used:
wiki/printers_prusa.txt · Last modified: by samurailink3