Differences

This shows you the differences between two versions of the page.

--- wiki:printers_prusa [2026/01/22 20:59] – Cleaning up page by moving content to sub-pages samurailink3
+++ wiki:printers_prusa [2026/02/14 08:42] (current) – Added link to Prusa Plate for Guerrilla Whistle samurailink3
@@ Line 4: / Line 4: @@
   * [[wiki:printers/prusa/plates/toms-assorted-whistles|Tom's Assorted Whistle Plates]]
   * [[wiki:printers/prusa/plates/pocket-riot-x74|Pocket Riot x74 Plates]]
+  * [[wiki:printers/prusa/plates/end-of-reel-plates|End-of-Reel Plates]]
+  * [[wiki:printers/prusa/plates/whistle-crew-micro-bitonal|Whistle Crew Micro Bitonal]]
+  * [[wiki:printers/prusa/plates/guerrilla-whistle|ACstudio's Guerrilla Whistle]]
-=== MK3(S+) ===
-  * {{ :wiki:prusa_whistles_endofreel_mk3.3mf | Prusa End-of-Reel Whistles MK3}} (3MF)
-    * This is a 3MF set to print each whistle individually. You don't get nearly as many on a plate this way, but its a helpful tool if you need to run out a roll of filament and don't want to play "filament chicken".
-    * This uses mostly-stock presets and the plates themselves are not space-optimized.
-    * Models Used:
-      * https://printables.com/model/394669-loud-and-compact-whistle-for-your-keychain
-=== MK4(S) ===
+==== Optimized Part Arrangement ====
-  * {{ :wiki:prusa_whistles_mk4.3mf | Prusa End-of-Reel Whistles MK4}} (3MF)
+PrusaSlicer has a "hidden" setting that allows you specify the distance between parts. Just right-click the "Arrange" button and set your own settings. I use 2mm spacing and enable rotations.
-    * This is a 3MF set to print each whistle individually. You don't get nearly as many on a plate this way, but its a helpful tool if you need to run out a roll of filament and don't want to play "filament chicken".
-    * This uses mostly-stock presets and the plates themselves are not space-optimized.
-    * Models Used:
-      * https://printables.com/model/394669-loud-and-compact-whistle-for-your-keychain
+**Before:**
+{{ :wiki:prusaslicer_defaultarrange.png?direct&400 |}}
+**Default Options Modal:**
+{{ :wiki:prusaslicer_defaultarrangeoptions.png?direct&400 |}}
+**After 2mm spacing optimization:**
+{{ :wiki:prusaslicer_optimizedarrange.png?direct&400 |}}
+==== Troubleshooting ====
+  * [[wiki:printers/prusa/troubleshooting/layer-shifts|Layer Shifts]]