Whistle Crew Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Prusa Printers ======

==== Pre-Plated 3MFs ====

=== MK3(S+) ===
  * {{ :wiki:prusa_whistles_mk3.3mf | Prusa Whistles MK3}}
    * This is a 3MF of 9 plates of individual whistle types. Bed 1 is a test plate.
    * This uses mostly-stock presets and the plates themselves are not space-optimized.
    * Models Used:
      * https://printables.com/model/394669-loud-and-compact-whistle-for-your-keychain
      * https://makerworld.com/en/models/1175755-emergency-whistle#profileId-1184953
      * https://makerworld.com/en/models/1320273-whistle-fast-8-min-4g#profileId-1356302
      * https://makerworld.com/en/models/1122893-pocketriot-small-loud-whistle-for-keychain#profileId-1121688
      * https://makerworld.com/en/models/1854056-halloween-whistle-bone-keychain-for-trick-or-treat#profileId-1982288
      * https://makerworld.com/en/models/1148955-heart-whistle-120-db#profileId-1152854
      * https://makerworld.com/en/models/1148954-tiny-emergency-whistle-120-db#profileId-1152853
      * https://makerworld.com/en/models/1321878-dual-tone-loud-emergency-whistle#profileId-1358168

  * {{ :wiki:prusa_whistles_endofreel_mk3.3mf | Prusa End-of-Reel Whistles MK3}}
    * This is a 3MF set to print each whistle individually. You don't get nearly as many on a plate this way, but its a helpful tool if you need to run out a roll of filament and don't want to play "filament chicken".
    * This uses mostly-stock presets and the plates themselves are not space-optimized.
    * Models Used:
      * https://printables.com/model/394669-loud-and-compact-whistle-for-your-keychain

=== MK4(S) ===
  * {{ :wiki:prusa_whistles_mk4.3mf | Prusa Whistles MK4}}
    * This is a 3MF of 9 plates of individual whistle types. Bed 1 is a test plate.
    * This uses mostly-stock presets and the plates themselves are not space-optimized.
    * Models Used:
      * https://printables.com/model/394669-loud-and-compact-whistle-for-your-keychain
      * https://makerworld.com/en/models/1175755-emergency-whistle#profileId-1184953
      * https://makerworld.com/en/models/1320273-whistle-fast-8-min-4g#profileId-1356302
      * https://makerworld.com/en/models/1122893-pocketriot-small-loud-whistle-for-keychain#profileId-1121688
      * https://makerworld.com/en/models/1854056-halloween-whistle-bone-keychain-for-trick-or-treat#profileId-1982288
      * https://makerworld.com/en/models/1148955-heart-whistle-120-db#profileId-1152854
      * https://makerworld.com/en/models/1148954-tiny-emergency-whistle-120-db#profileId-1152853
      * https://makerworld.com/en/models/1321878-dual-tone-loud-emergency-whistle#profileId-1358168

  * {{ :wiki:prusa_whistles_mk4.3mf | Prusa End-of-Reel Whistles MK4}}
    * This is a 3MF set to print each whistle individually. You don't get nearly as many on a plate this way, but its a helpful tool if you need to run out a roll of filament and don't want to play "filament chicken".
    * This uses mostly-stock presets and the plates themselves are not space-optimized.
    * Models Used:
      * https://printables.com/model/394669-loud-and-compact-whistle-for-your-keychain