Differences

This shows you the differences between two versions of the page.

--- wiki:printers_annex [2026/01/25 19:36] – [3MFs] bb3d
+++ wiki:printers_annex [2026/01/28 07:26] (current) – [3MFs (Adjust to your hardware)] bb3d
@@ Line 1: / Line 1: @@
-===== Annex K3 Printers =====
-==== 3MFs ====
+====== Annex Engineering Printers ======
-  * {{ :wiki:whistle_v2.1_v7_-_annex_k3_-_60_count.3mf | 60x plate }} - 2.4 hours
+You can find info on Annex printers [[https://annex-engineering.eu|here]]
-    * This has a filament profile for LDO ABS
+----
+==== 3MFs (Adjust to your hardware) ====
+=== K3 ===
+  * [[https://www.printables.com/model/1563396-compact-dual-chamber-whistle-v21|Compact Dual-Chamber Whistle V2.1]]
+    *Sherpa Mini extruder + Chube Air hotend
+      * {{ :wiki:whistle_v2.1_v7_-_annex_k3_-_1_count.3mf | 1 whistle - clone to your preferred plate count }}
+        * settings for a 0.5mm nozzle, takes 1 min 40 sec per whistle. Takes ~1.3 hours for 60
+        * This has a filament profile for LDO ABS
+----