Differences

This shows you the differences between two versions of the page.

--- wiki:users_samurailink3_file-dump [2026/02/01 05:12] – Added new testing notes to user page samurailink3
+++ wiki:users_samurailink3_file-dump [2026/02/01 05:58] (current) – Closed Penne 2.0 testing samurailink3
@@ Line 2: / Line 2: @@
 ==== Open Tests ====
-  * Penne 2.0
+  * None
-    * Warnings: Not louder than 38mm micro bitonal
-      * TODO: Compare to Pocket Riot
-      * TODO: Find and install db meter, ask group for testing methodologies, document
-    * MK3S: TODO
-    * MK4: TODO
 ==== Completed Tests ====
@@ Line 24: / Line 19: @@
     * First MK3S plate was //bad//. >25% whistles with at least one chamber silent. From a visual inspection, it appears my first layer may be too high, resulting in gaps, or I need to slightly increase the extrusion multiplier. For the moment, tasked MK3S to print Pocket Riots.
     * Tests have resulted in the following wiki page: [[printers_prusa_plates_whistle-crew-micro-bitonal|Whistle Crew Micro Bitonal]]
+    * Test Closed
+=== Penne 2.0 ===
+  * Penne 2.0
+    * Warnings: Not louder than 38mm micro bitonal
+      * TODO: Compare to Pocket Riot
+      * TODO: Find and install db meter, ask group for testing methodologies, document
+    * MK3S: TODO
+    * MK4: Printed single test whistle
+      * Tests show that the Penne 2.0 produces less-audible sound with a harder "toot". Will stick to 38mm Micro Bitonals and Pocket Riots for now.
     * Test Closed