Differences

This shows you the differences between two versions of the page.

--- wiki:users_samurailink3_file-dump [2026/01/25 19:56] – Added x96 Whistle Crew Bitonal file samurailink3
+++ wiki:users_samurailink3_file-dump [2026/02/01 05:58] (current) – Closed Penne 2.0 testing samurailink3
@@ Line 1: / Line 1: @@
 ===== SamuraiLink3's File Dump =====
+==== Open Tests ====
+  * None
+==== Completed Tests ====
+=== Whistle Crew Micro Bitonal ===
   * {{ :wiki:testing_prusawhistles_whistlecrewmicrobitonal_mk4.3mf |__TESTING PLATE__ - Whistle Crew Micro Bitonal (3MF)}}
-    * Whistle Crew Micro Bitonal with classic wall generation and a 0.6HF nozzle
+    * [[models_38mm-micro-bitonal-half-height-hole|Whistle Crew Micro Bitonal]] with classic wall generation and a 0.6HF nozzle
       * Arachne left a pin-hole on the non-key-ring side chamber, leaving it silent unless plugged, classic wall generation seems to avoid this issue
     * Initial single-whistle test done. Seems to work well, both chambers are loud. Structure is solid and unlikely to break under normal use
   * {{ :wiki:testing_prusawhistles_whistlecrewmicrobitonal_x96_mk4.3mf |__TESTING PLATE__ - Whistle Crew Micro Bitonal x96 (3MF)}}
+    * [[models_38mm-micro-bitonal-half-height-hole|Whistle Crew Micro Bitonal]] with classic wall generation and a 0.6HF nozzle
+    * Initial mechanical and manual testing of 10 whistles from this plate had a 100% success rating.
+    * Will print on MK3S and another MK4 plate to verify
+    * Second MK4 plate was perfect, all 10 whistles passed QA.
+    * First MK3S plate was //bad//. >25% whistles with at least one chamber silent. From a visual inspection, it appears my first layer may be too high, resulting in gaps, or I need to slightly increase the extrusion multiplier. For the moment, tasked MK3S to print Pocket Riots.
+    * Tests have resulted in the following wiki page: [[printers_prusa_plates_whistle-crew-micro-bitonal|Whistle Crew Micro Bitonal]]
+    * Test Closed
+=== Penne 2.0 ===
+  * Penne 2.0
+    * Warnings: Not louder than 38mm micro bitonal
+      * TODO: Compare to Pocket Riot
+      * TODO: Find and install db meter, ask group for testing methodologies, document
+    * MK3S: TODO
+    * MK4: Printed single test whistle
+      * Tests show that the Penne 2.0 produces less-audible sound with a harder "toot". Will stick to 38mm Micro Bitonals and Pocket Riots for now.
+    * Test Closed