Differences

This shows you the differences between two versions of the page.

--- wiki:printers_voron [2026/01/25 20:04] – bb3d
+++ wiki:printers_voron [2026/01/28 07:26] (current) – [3MFs (Adjust to your specific hardware)] bb3d
@@ Line 1: / Line 1: @@
-==== 3MFs (Adjust to your specific hardware) ====
+====== Voron Printers ======
+You can find info on Voron printers [[https://www.vorondesign.com/|here]]
 ----
+==== 3MFs (Adjust to your specific hardware) ====
 === Voron 2.4 300mm (Doomcube or standard) ===
   * Bondtech LGX Lite Pro extruder + Chube Compact hotend
     * [[https://www.printables.com/model/1563396-compact-dual-chamber-whistle-v21|Compact Dual-Chamber Whistle V2.1]]
-      * {{ :wiki:whistle_v2.1_v7_-_voron_24_300_-_100_count.3mf | 100x Plate }} - 5.1 hours
+      * {{ :wiki:whistle_v2.1_v7_-_voron_24_-_1_count.3mf | 1 whistle - clone to your preferred plate count}}
-      * {{ :wiki:whistle_v2.1_v7_-_voron_24_300_-_150_count.3mf | 150x Plate }} - 7.45 hours
+        * Settings for a 0.4mm nozzle. Each whistle takes around 2 min 40 sec. ~4.3 hours for 100
         * There are filament profiles for Ambrosia ASA, Fusion Filaments ABS, and 3DO PETG 2.0
 ----