Differences

This shows you the differences between two versions of the page.

--- wiki:printers_snapmaker [2026/01/25 20:00] – [3MFs] bb3d
+++ wiki:printers_snapmaker [2026/01/28 07:29] (current) – [3MFs] bb3d
@@ Line 1: / Line 1: @@
 ====== Snapmaker Printers ======
+You can find info on Snapmaker printers [[https://www.snapmaker.com/| here]]
+----
 ==== 3MFs ====
 === U1 ===
   * [[https://www.printables.com/model/1563396-compact-dual-chamber-whistle-v21|Compact Dual-Chamber Whistle V2.1]]
-    * {{ :wiki:snapmaker_u1_-_whistle_v2.1_v7_x_100.3mf | 100x Plate}} - 7 hours
+    * {{ :wiki:bb3d_whistle_v2.1_v7_-_snapmaker_u1_-_1_count.3mf | 1 whistle - clone to your preferred plate count }}
-    * {{ :wiki:snapmaker_u1_-_whistle_v2.1_v7_150.3mf | 150x Plate}} - 11 hours (inefficient due to different directions of whistles, I usually do the 100 job)
+      *  Settings for a 0.4mm nozzle. Each whistle takes around 3 min 45 sec. ~5.5 hours for 100
-      *  These also have filament profiles for Polymaker PETG, PolyTerra PLA, and CookieCad PLA
+      *  These also have filament profiles for 3DO PETG 2.0, Polymaker PETG, PolyTerra PLA, and CookieCad PLA