You can find Bambu Labs printers here: https://bambulab.com/en-us

Bambu printers can consume any STL or 3MF linked on this site. Check back for specific full-plate files for Bambu printers.

Remixed Bitonal - 38mm - half height hole - 118 on a plate with 3 colors - P1S

• If you don't have an AMS, you can remove the color swaps after slicing the plate on the right vertical bar.

You might want to fill a plate with your whistle of choice. Recommend using the “Clone” option in Bambu Studio, over the “Fill bed with copies” option.

You can see these options when you select a whistle/object and then right click on it.

When you select Clone, there's some minimal spacing between objects, so that printed objects don't merge together. When selecting “Fill bed with copies”, there is no spacing between objects and may result in needing to break the whistles apart and potentially causing failures.

The Bambu Handy app has the ability to mark, during the print run, specific objects to skip, if there are less than 64 objects on the plate. This is super helpful if you see during the print that there's a few whistles where adhesion failed or started to string while the majority of the rest of your plate has no issues. You can mark those objects to “skip” and Bambu will then skip over any objects marked as “skip” and continue printing all other objects. You no longer have to stop/cancel the print!

You can group/merge objects in Bambu Studio, so that a group of whistles can be considered one object. If you're printing 100+ whistles on a plate, you can group/merge whistles to reduce the number of “objects” on the plate to less than 64 so that you can still take advantage of Bambu's Skip capability. Select 2+ whistles on the plate, right click and select the “Merge” option. Recommend merging 2+ whistles and then cloning to fill your plate.