Initial single-whistle test done. Seems to work well, both chambers are loud. Structure is solid and unlikely to break under normal use

Whistle Crew Micro Bitonal with classic wall generation and a 0.6HF nozzle

Initial mechanical and manual testing of 10 whistles from this plate had a 100% success rating.

Will print on MK3S and another MK4 plate to verify

Second MK4 plate was perfect, all 10 whistles passed QA.

First MK3S plate was bad. >25% whistles with at least one chamber silent. From a visual inspection, it appears my first layer may be too high, resulting in gaps, or I need to slightly increase the extrusion multiplier. For the moment, tasked MK3S to print Pocket Riots.

Tests have resulted in the following wiki page: Whistle Crew Micro Bitonal

Test Closed

MK3S: TODO

Test Closed