===== Whistle Crew Micro Bitonal =====
This 3MF uses the [[models_38mm-micro-bitonal-half-height-hole|38mm Micro-Bitonal with Half-Height Hole]] model. Make sure to change the filament and printer profiles to fit your specific machine(s) and settings.

==== MK4(S) ====
  * {{ :wiki:prusawhistles_whistlecrewmicrobitonal_mk4.3mf |Whistle Crew Micro Bitonal Single-Whistle (3MF)}}
    * This is a test plate with a single whistle.
  * {{ :wiki:prusawhistles_whistlecrewmicrobitonal_x96_mk4.3mf |Whistle Crew Micro Bitonal x96 (3MF)}}
    * This is a plate of 96. Whistles are arranged 2mm apart.
    * **NOTE:** If your printer's first layer isn't perfect, it can cause defects in this model that result in one or both chambers being silent in a significant (>25%) number of whistles. This is not a defect of the model, it is a defect of my (lack of) calibration. Ensure your first layers are perfect before attempting this on any printer that needs manual z-offset adjustment.