====== Annex Engineering Printers ======
You can find info on Annex printers [[https://annex-engineering.eu|here]]
----

==== 3MFs (Adjust to your hardware) ====
=== K3 ===
  * [[https://www.printables.com/model/1563396-compact-dual-chamber-whistle-v21|Compact Dual-Chamber Whistle V2.1]]
    *Sherpa Mini extruder + Chube Air hotend
      * {{ :wiki:whistle_v2.1_v7_-_annex_k3_-_1_count.3mf | 1 whistle - clone to your preferred plate count }}
        * settings for a 0.5mm nozzle, takes 1 min 40 sec per whistle. Takes ~1.3 hours for 60
        * This has a filament profile for LDO ABS 

----